Yacht Aditi

Got No Sole

The latter part of fitting the watermaker lifting the cabin sole through the vessel from the stern to the water tank and then running the 8mm pneumatic tubing through all the formers. We struck gold when we found that the water tank had already been tapped for a watermaker so at this end it was just plug and play with a pnuematic air line connector.

DSC00862.JPG

We are setting up a secondary fresh water feed line and pneumatic connectors in case we need to bypass the water tank at any stage. The connectors simply unclip/clip-in so redirection would take a few boat minutes.

Leave a Reply